FENDER URBAN MESH RIDING JACKET with base layer

What’s included with the product?

• 1 Fender urban mesh riding jacket + B100 base layer top
• Powertector Shoulder Level 2 armour set
• Powertector Elbow Level 2 armour set
• Powertector Back Level 2 armour
• Powertector Chest Level 2 armour (can be bought separately)

Things to keep in mind to ensure the measurements are taken correctly –

It will be helpful to have a family member or a friend take the measurements – Please use flexible tape only, like a tailor’s tape – All the measurements must be in the same units, whether cm or inches – You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 – Measure using a tailor’s tape There are two key measurements that you need to take into consideration for figuring out your jacket size.

A) Chest – Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.

B) Waist – Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 – Find your jacket size by checking measurements against the size chart provided.

– If both the measurements do not fall in one particular size – use the larger of the two measures to choose the jacket size.

– If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference. Remember, each brand has its own body size charts, so do check the chart before you select the size.

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place while on the motorcycle If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Fender is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.

STEP 1 –

Confirm that the armours are in the correct position The jacket fit should be such that the armours are in the anatomically correct position. Since we are all unique, this could mean that the elbow armour might be slightly off in some cases depending on length of your arms.

STEP 2 – 

Ensure the armours are properly positioned. – In case the jacket fit is correct but the elbow armour is slightly off, use the cinching mechanism to adjust the elbow armour and bring it closer to your body.

The placement of armour in your riding jacket is just as important as the type of armour used. The Fender Jacket comes with the full complement of Powertector SEB CE Level 2 armour that offers superior impact protection.

We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using premium PowerTector Level 2 protectors for the elbows, shoulder and back.

Try one on today, and you will immediately understand what a huge difference this makes to the comfort of the rider. The Fender is designed to allow maximum ventilation in all key areas as determined by the body heat map.

We even made sure that the inner lining of our jacket pockets are made of mesh so that it does not inhibit the flow of air when you’re on the move.

The placement of armour in your riding jacket is just as important as the type of armour used. The Fender Jacket comes with the full complement of Powertector SEB CE Level 2 armour that offers superior impact protection.

We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using premium PowerTector Level 2 protectors for the elbows, shoulder and back.

Try one on today, and you will immediately understand what a huge difference this makes to the comfort of the rider. The Fender is designed to allow maximum ventilation in all key areas as determined by the body heat map.

We even made sure that the inner lining of our jacket pockets are made of mesh so that it does not inhibit the flow of air when you’re on the move.

IMPORTANT NOTE:

Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:

For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER) DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.

For longer life of the fabric, we recommend hand washing the jacket using mild detergent. Do not place your jacket near, or come in contact with a direct heat source. Dry the jacket on a hanger away from direct sunlight where there is good ventilation.

Zippers need to be cleaned and lubricated regularly – you can use vaseline or candle wax

STORAGE: Make sure your jacket is completely dry before you store it on a hanger.

If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage Do not store the jacket in air-tight plastic bags

Warranty

We provide a 12 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.